OUR POWERFUL PRESSES

Briquetting presses RB 100 - 200 and RB 100 - 200 plus


   
RB 100 - 200 and RB 100 - 200 plus series
for high throughput with two different sized containers left and right versions of the compaction unit available


Both series have the same compaction unit, in order to produce high-strength briquettes. The difference is the extra large, high capacity container for the RB 100 - 200 plus series.

Numerous options are available:
- Oil cooling for continuous operation
- Transmission lines
- Briquette length monitoring
- Automatic on/off
- Switch for oil shortage
- Hopper attachments

Technical Features



1 = Large reserve container with high-quality discharge unit.
(Agitator discharge with integrated screw conveyor)

2 = All mechanical movements can be performed manually using the hand controls on the switching cabinet. The PLC controls ensure user friendly, fully automatic operation.

3 = Hardened, replaceable compressor channel bushings are standard equipment on all of the machines.

4 = Automatic opening of the tongs ensures trouble-free, constant briquettes production.

5 = Hydraulic drive with a power rating of up to 22 kW
Optional: Oil cooling, low oil switch, and oil temperature measurement unit.

6 = Filling cylinder

7 = Hydraulically controlled press cylinder

8 = Automatic strand length monitoring

9 = Automatic on/off (option)

These presses have high-volume reserve containers with an integrated screw conveyor. The material passes through the screw conveyor into the filling shaft, where it is pre-compacted in the filler cylinder before being conveyed to the press channel. In the channel, the press cylinder presses the material to be compacted into the conically closed tongs until it achieves the desired briquette hardness. Then the tongs open and the briquette is ejected.


Briquette extension (optional)

Details


The fully automatic delivery unit is installed at the base of the storage tank. This unique worm precompactor ensures a consistent briquette length.

Optimised pressing results are achieved with the cylindrical pressing chamber. The hydraulic filler cylinder compresses the material at high pressure into a compact briquette


The hydraulic unit provides the press with power. Specification according to requirements and application.

Two high-powered motors drive the screw compressor and the delivery unit


The filling level gauge (automatic ON/OFF) guarantees fully automatic operation.

The strand length monitor ensures a constant, high production rate of briquettes, even after a change of materials.
There is also a possibility for connecting transport pipes.

Technical data



RB 100 RB 120 RB 160 RB 200
Reserve container (mm): 1400 x 1400 x 920
Briquette diameter (mm): 50 60 70 80
Throughput (approx.kg/h): 80- 100* 80- 120* 120-160* 160-200 *
Hydraulic motor (kW): 7,5 7,5 11 11
Oil quantity (l): 100 160 160 250
Weight (approx.kg): 870 1000 1050 1250
RB 100 plus RB 120 plus RB 160 plus RB 200 plus
Reserve container (mm): 2000 x 2000 x 920
Briquette diameter (mm): 50 60 70 80
Throughput (approx.kg/h) 80- 100* 80-120* 120-160* 160-200 *
Hydraulic motor (kW): 7,5 7,5 11 11
Oil quantity (l): 100 160 160 250
Weight (approx. kg): 1050 1200 1250 1450
         
* Throughput is material dependent;
maximum material moisture should not exceed 18 %.